BlueBoat
BlueBoat Assembly Guide
BlueBoat Software Setup
BlueBoat Operator’s Guide
BlueBoat General Integration Guide
BlueROV2
BlueROV2 Assembly
BlueROV2 Software Setup
BlueROV2 Operation
Newton Subsea Gripper Installation on a BlueROV2
All Guides and Tutorials
Watertight Enclosure RAILS User Guide
Learn how to configure a RAILS system and install it in your Watertight Enclosure!
Connectorize the Fathom Tether with a Cobalt Connector
Learn to connectorize the Blue Robotics Fathom Tether with an 8-pin Blue Trail Cobalt Connector.
BaseStation Directional Antenna Kit Guide
Learn how to install and use the BaseStation Directional Antenna Upgrade Kits!
Ping Altimeter Repair Guide
Learn to repair your Ping Altimeter and Echosounder.
Upgrading a BlueROV2 from Companion to BlueOS
Upgrade Your Companion BlueROV2 to BlueOS!
BlueOS and Node-RED: Steering Toward Continuous Discovery
Learn to use Node-RED to receive, log, and graph payload data from payloads connected to your BlueOS device! This guide will be continuously improved and expanded with new devices, communication methods, and techniques.
BlueBoat 6S Battery Splitter Cable Installation
Learn how to install the 6S Battery Splitter Cable in your BlueBoat.
Tether Repair Guide
Learn how to repair your Fathom tether!
Watertight Enclosure Clamps Guide
Learn how to install the Watertight Enclosure Clamps!
Newton Gripper Repair Guide
Learn how to repair your Newton Gripper!
Watertight Box User Guide
Learn how to assemble and use your Watertight Box!
Fighting Galvanic Corrosion with Zinc and Tef-Gel
Learn how to protect from galvanic corrosion through a combination of isolation via lubricant and use of a sacrificial anode—zinc!
Ping Integration Kit for BlueBoat Installation Guide
Learn how to mount a Ping Echosounder to the BlueBoat using the Ping Integration Kit for BlueBoat.
Collecting and Creating Bathymetric Maps with the BlueBoat and Ping
Learn to collect, filter, and visualize bathymetry data collected with the Blue Robotics BlueBoat and Ping2 single beam sonar!
Newton Sediment Sampler Attachment Guide
Learn how turn the Newton Gripper into a sediment sampler using the Newton Sediment Sampler Attachment!
Control the NavLight with Arduino code
This guide will show you how to use Arduino code to control the NavLight, letting you blink or fade its output with ease!
Integrating the Omniscan 450 SS on the BlueBoat
Learn how to integrate the Omniscan 450 SS on the BlueBoat!
Connecting Your Device with Navigator and BlueOS
Get things connected to your BlueOS powered vehicle! Whether Serial, I2C, Ethernet or USB, collecting data for your application is possible!
Ethernet Switch Installation Guide for the BlueBoat
Install the Blue Robotics Ethernet Switch in the BlueBoat to connect additional Ethernet devices.
Using a BlueBoat with a Lowrance Sonar for Hydrographic Survey
How to integrate a Lowrance FS-7 Sonar transducer with a BlueBoat, to collect hydrographic survey data and generate maps using C-Map Genesis.
BlueBoat General Integration Guide
Learn about all the ways things can be mounted, attached, routed, plugged in, and generally integrated into the BlueBoat vehicle platform!
BlueBoat Operator’s Guide
Learn how to operate your BlueBoat!
BlueBoat Software Setup
Learn how to set up the software for your BlueBoat!
Installing the BlueROV2 Roof Rack
Learn how to install the BlueROV2 Roof Rack on your ROV!