$14.00

This wrench makes it easy to install the plug of the WetLink Penetrator, creating a high-pressure seal with your cable. It can be turned by hand or with a 1/4″ socket driver and we recommend using it with the WetLink Assembly Block. It’s made of hardened tool steel for a long life.

Clear
SKU: WLP-PLUG-WRENCH-VP
HS Code: 8204

Product Description

The WetLink Penetrator Plug Wrench helps you assemble the WetLink Penetrator with ease. It’s designed to tighten the plug into the bulkhead with a slot in the side to account for the cable. The wrench can be used with the included lever bar or with any 1/4″ socket driver.

The wrench is made from hardened tool steel and designed to last!

We recommend using the plug wrench with the WetLink Assembly Block, which holds the penetrator bulkhead while tightening the plug.

Product Description

The WetLink Penetrator Plug Wrench helps you assemble the WetLink Penetrator with ease. It’s designed to tighten the plug into the bulkhead with a slot in the side to account for the cable. The wrench can be used with the included lever bar or with any 1/4″ socket driver.

The wrench is made from hardened tool steel and designed to last!

We recommend using the plug wrench with the WetLink Assembly Block, which holds the penetrator bulkhead while tightening the plug.

For the selected hex size, the following parts are included.

  • 1 x WetLink Penetrator Plug Wrench
  • 1 x Lever Bar

Specifications

Parameter11mm Hex14mm Hex
Part NumberWLP-11MM-PLUG-WRENCHWLP-14MM-PLUG-WRENCH
MaterialChrome-plated steel hardened to HRC 32-36
Drive Size1/4 in (6.3 mm)
Hex Size11 mm14 mm
WetLink Penetrator CompatibilityWLP-M06-4.5MM-HC
WLP-M06-4.5MM-LC
WLP-M10-4.5MM-HC
WLP-M10-4.5MM-LC
WLP-M10-5.5MM-HC
WLP-M10-5.5MM-LC
WLP-M10-6.5MM-HC
WLP-M10-6.5MM-LC
WLP-M10-7.5MM-HC
WLP-M10-7.5MM-LC
WLP-M10-8.5MM-HC
WLP-M10-8.5MM-LC

WLP Tool Information

Seal SizeBulkhead SizeBulkhead WrenchBulkhead/Nut Flat SizeBulkhead Installation TorquePlug WrenchPlug Hex SizePlug Installation Torque
4.5M06WL-M06-BULKHEAD-WRENCH12 mm1 N⋅mWLP-11MM-PLUG-WRENCH11 mm14 N⋅m
4.5M10WL-M10-BULKHEAD-WRENCH16 mm3.5 N⋅mWLP-11MM-PLUG-WRENCH11 mm14 N⋅m
5.5, 6.5, 7.5, 8.5M10WL-M10-BULKHEAD-WRENCH16 mm3.5 N⋅mWLP-14MM-PLUG-WRENCH14 mm14 N⋅m
9.5M14WL-M14-BULKHEAD-WRENCH20 mm3.5 N⋅mWLP-18MM-PLUG-WRENCH18 mm20 N⋅m
* The WetLink Penetrator Assembly Block is compatible with all WetLink Penetrator sizes

2D Drawings

WLP-11MM-PLUG-WRENCH-R1 (.pdf)

WLP-14MM-PLUG-WRENCH-R1 (.pdf)

3D Models

WLP-11MM-PLUG-WRENCH-R1 (.zip)

WLP-14MM-PLUG-WRENCH-R1 (.zip)

Revision History

8 September 2021

  • WLP-11MM-PLUG-WRENCH-R1 – Initial release

8 June 2021

  • WLP-14MM-PLUG-WRENCH-R1 – Initial release

Quick Start

Tighten the plug using the Plug Wrench and ratchet until it sits flush with the bulkhead, then turn an additional 1/16th of a turn.

Guides

WetLink Penetrator Assembly Guide
The WetLink Penetrator (WLP) is our next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables. This guide will show you how to assemble a WetLink Penetrator using our WLP assembly tools or common hand tools.

Support

Blue Robotics Forums – WetLink Products