$20.00

The tool holds the WetLink Penetrator bulkhead during assembly and is compatible with M06, M10, and M14 bulkhead sizes. It’s designed to fit in a vise or be bolted to a table. We recommend using it with the WetLink Plug Wrench.

In stock

SKU: BR-100686
HS Code: 8204

Product Description

The WetLink Penetrator Assembly Block helps you assemble the WetLink Penetrator with ease by holding the bulkhead while the plug is tightened. It has three cavities to hold different sizes of bulkhead: M06, M10, and M14.

The assembly block is made from anodized aluminum and it’s designed to last for a long time!

We recommend using the assembly block with the WetLink Penetrator Plug Wrench, which is used to tighten the plug into the bulkhead.

Product Description

The WetLink Penetrator Assembly Block helps you assemble the WetLink Penetrator with ease by holding the bulkhead while the plug is tightened. It has three cavities to hold different sizes of bulkhead: M06, M10, and M14.

The assembly block is made from anodized aluminum and it’s designed to last for a long time!

We recommend using the assembly block with the WetLink Penetrator Plug Wrench, which is used to tighten the plug into the bulkhead.

  • 1 x WetLink Assembly Block

Specifications

ParameterValue
Material6061-T6 Aluminum
WetLink Penetrator CompatibilityAll WLP Bulkhead Sizes (M06, M10, M14)
Mounting Hole Spacing77.6 mm3.055 in
Mounting Through-Hole Diameter6.2 mm0.244 in
Mounting Hole ThreadsM6 x 1.0

2D Drawings

 Drawing

3D Models

WLP-ASSEMBLY-BLOCK-R1 (.zip)

Revision History

20 June 2023

  • WLP-ASSEMBLY-BLOCK-R1-RP SKU changed to BR-100686

8 June 2021

  • WLP-ASSEMBLY-BLOCK-R1 - Initial release

Guides

WetLink Penetrator Assembly Guide
The WetLink Penetrator (WLP) is our next-generation solution for low-cost, high-pressure, high-reliability sealing of electrical cables. This guide will show you how to assemble a WetLink Penetrator.

Support

Blue Robotics Forums