$14.00

This wrench makes it easy to install the plug of the WetLink Penetrator, creating a high-pressure seal with your cable. It can be turned by hand or with a 1/4″ socket driver and we recommend using it with the WetLink Assembly Block.

Clear
SKU: WLP-PLUG-WRENCH-VP
HS Code: 8204

Product Description

The WetLink Penetrator Plug Wrench helps you assemble the WetLink Penetrator with ease. It’s designed to tighten the plug into the bulkhead with a slot in the side to account for the cable. The wrench can be used with the included lever bar or with any 1/4″ socket driver.

The wrench is made from hardened tool steel and designed to last!

We recommend using the plug wrench with the WetLink Assembly Block, which holds the penetrator bulkhead while tightening the plug.

Product Description

The WetLink Penetrator Plug Wrench helps you assemble the WetLink Penetrator with ease. It’s designed to tighten the plug into the bulkhead with a slot in the side to account for the cable. The wrench can be used with the included lever bar or with any 1/4″ socket driver.

The wrench is made from hardened tool steel and designed to last!

We recommend using the plug wrench with the WetLink Assembly Block, which holds the penetrator bulkhead while tightening the plug.

For the selected hex size, the following parts are included.

  • 1 x WetLink Penetrator Plug Wrench
  • 1 x Lever Bar

Specifications

Parameter11mm Hex14mm Hex
SKUWLP-11MM-PLUG-WRENCH-R1-RPWLP-14MM-PLUG-WRENCH-R1-RP
MaterialChrome-plated steel
Drive Size1/4 in / 6.3 mm
Hex Size11 mm14 mm
WetLink Penetrator CompatibilityWLP-M06-4.5MM
WLP-M10-4.5MM
WLP-M10-6.5MM

2D Drawings

WLP-11MM-PLUG-WRENCH-R1 (.pdf)

WLP-14MM-PLUG-WRENCH-R1 (.pdf)

3D Models

WLP-11MM-PLUG-WRENCH-R1 (.zip)

WLP-14MM-PLUG-WRENCH-R1 (.zip)

Revision History

8 September 2021

  • WLP-11MM-PLUG-WRENCH-R1 – Initial release

8 June 2021

  • WLP-14MM-PLUG-WRENCH-R1 – Initial release

Quick Start

Tighten the plug using the Plug Wrench and ratchet until it sits flush with the bulkhead, then turn an additional 1/16th of a turn.

Guides

WetLink Penetrator Assembly Guide
The WetLink Penetrator (WLP) is our next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables. This guide will show you how to assemble a WetLink Penetrator using our WLP assembly tools or common hand tools.

Support

Blue Robotics Forums