$16.00$21.00

Easily and securely tighten cable penetrators and bulkheads in tight quarters with this specially designed wrench! It’s made of hardened tool steel for a long life and has a square drive socket adapter to be used with a socket wrench.

Clear
SKU: WL-BULKHEAD-WRENCH-VP
HS Code: 8204

Product Description

The cable penetrators and bulkheads have wrench flats that making tightening relatively easy, but when you pack a bunch of them together it gets more difficult. That’s particularly true with the 18-hole end-cap used on the BlueROV2. This specially designed wrench makes it easy to tighten penetrators in tight spaces.

The wrench is made of hardened chrome-plated steel and includes a lever bar designed to apply just the right amount of torque to tighten the penetrator. This tool is a great addition to your field toolbox!

Note: We recommend tightening the penetrators with your fingers and then use this wrench to tighten them an additional ~1/16 of a turn. When done, you should not be able to remove the penetrators by hand.

Product Description

The cable penetrators and bulkheads have wrench flats that making tightening relatively easy, but when you pack a bunch of them together it gets more difficult. That’s particularly true with the 18-hole end-cap used on the BlueROV2. This specially designed wrench makes it easy to tighten penetrators in tight spaces.

The wrench is made of hardened chrome-plated steel and includes a lever bar designed to apply just the right amount of torque to tighten the penetrator. This tool is a great addition to your field toolbox!

Note: We recommend tightening the penetrators with your fingers and then use this wrench to tighten them an additional ~1/16 of a turn. When done, you should not be able to remove the penetrators by hand.

  • 1 x Bulkhead Wrench of the selected bulkhead size
  • 1 x Lever Bar

Specifications

ParameterM06M10M14
Part NumberWL-M06-BULKHEAD-WRENCHWL-M10-BULKHEAD-WRENCHWL-M14-BULKHEAD-WRENCH
MaterialChrome-plated steel hardened to HRC 32-36
Square Drive Size1/4 in (6.3 mm)3/8 in (9.5 mm)
Wrench Flats12 mm16 mm20 mm
Penetrator CompatibilityAll M06 size bulkheadsAll M10 size bulkheadsAll M14 size bulkheads

WLP Tool Information

Seal SizeBulkhead SizeBulkhead WrenchBulkhead/Nut Flat SizeBulkhead Installation TorquePlug WrenchPlug Hex SizePlug Installation Torque
4.5M06WL-M06-BULKHEAD-WRENCH12 mm1 N⋅mWLP-11MM-PLUG-WRENCH11 mm14 N⋅m
4.5M10WL-M10-BULKHEAD-WRENCH16 mm3.5 N⋅mWLP-11MM-PLUG-WRENCH11 mm14 N⋅m
5.5, 6.5, 7.5, 8.5M10WL-M10-BULKHEAD-WRENCH16 mm3.5 N⋅mWLP-14MM-PLUG-WRENCH14 mm14 N⋅m
9.5M14WL-M14-BULKHEAD-WRENCH20 mm3.5 N⋅mWLP-18MM-PLUG-WRENCH18 mm20 N⋅m
* The WetLink Penetrator Assembly Block is compatible with all WetLink Penetrator sizes

2D Drawings

WL-M06-BULKHEAD-WRENCH-R1 (.pdf)

WL-M10-BULKHEAD-WRENCH-R1 (.pdf)

WL-M14-BULKHEAD-WRENCH-R1 (.pdf)

3D Models

WL-M06-BULKHEAD-WRENCH-R1 (.zip)

WL-M10-BULKHEAD-WRENCH-R1 (.zip)

WL-M14-BULKHEAD-WRENCH-R1 (.zip)

Revision History

25 January 2022

  • WL-M14-BULKHEAD-WRENCH-R1 – Initial Release

3 September 2021

  • WL-M06-BULKHEAD-WRENCH-R1 – Initial Release

8 June 2021

  • WL-M10-BULKHEAD-WRENCH-R1 – Initial Release

Quick Start

  1. Tighten the penetrators to finger tight, then use the Bulkhead Wrench to tighten them an additional ~1/16 of a turn.
  2. If you can’t loosen them with your fingers, they are tight enough.

Community

Blue Robotics Forum – Watertight Enclosures