$4.00$5.00

This WetLink Penetrator Blank is used to seal any unused holes on your watertight enclosure with a high-pressure seal. Each set includes a bulkhead, O-ring, and nut. It’s rated to 950 meter (3,116 feet) water depth! We recommend the Bulkhead Wrench for easy installation!

Clear
SKU: WLP-BLANK-VP
HS Code: 7616.10.7030

Product Description

This cable penetrator blank is provided with no hole. You can use it to seal an extra hole on a watertight enclosure! This blank features a hex socket for ease of installation!

The WetLink Penetrator (WLP) is our patent-pending, next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables as they pass into enclosures or other devices. It’s rated to a depth of 950 meters (3,116 feet) and compared to subsea connectors or penetrators, the WetLink Penetrator is a fraction of the cost while offering validated reliability that you can count on.

Product Description

This cable penetrator blank is provided with no hole. You can use it to seal an extra hole on a watertight enclosure! This blank features a hex socket for ease of installation!

The WetLink Penetrator (WLP) is our patent-pending, next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables as they pass into enclosures or other devices. It’s rated to a depth of 950 meters (3,116 feet) and compared to subsea connectors or penetrators, the WetLink Penetrator is a fraction of the cost while offering validated reliability that you can count on.

For each unit, the following items are included for the selected cable diameter size and bulkhead size.

  • 1 x WLP Bulkhead (Blank)
  • 1 x WLP Nut
  • 1 x O-Ring

Specifications

ParameterM06 ThreadM10 Thread
SKUWL-M06-BLANK-R1-RPWL-M10-BLANK-R1-RP
Performance Characteristics
Maximum Rated Depth (seawater)950 m / 3116 ft
Design Lifetime¹3 years or 500 cycles to rated depth
Temperature Rating (air)²-25 to 60°C / -13 to 140°F
Temperature Rating (water)²-4 to 40°C / 32 to 104°F
Tools
Recommended Bulkhead WrenchWL-M06-BULKHEAD-WRENCHWL-M10-BULKHEAD-WRENCH
Physical
Bulkhead Thread SizeM6M10
Bulkhead Thread Pitch1 mm1.5 mm
Bulkhead/Nut Wrench Flats12 mm16 mm
Hex Key3 mm6 mm
O-ring Size1.5 x 7 mm Buna-N 70A-013 Buna-N 70A
Overall Assembled Height from Endcap6 mm / 0.237 in8 mm / 0.315 in
Overall Thread Length 10 mm / 0.394 in20 mm / 0.788
Overall Outer Diameter13 mm / 0.512 in18 mm / 0.709 in
Recommended Through Hole Size6.2 mm10.2 mm
Bulkhead Material7075-T6 Aluminum
In Air Weight (no nut)2.3 g6.6 g
In Water Weight (no nut)1.5 g4.2 g
Recommended Installation Torque (bulkhead or nut)1 Nm3.5 Nm

¹ Design life was used to inform testing in an accelerated environment, does not reflect warranty period.

² Sustained high temperatures can lead to performance loss over long periods of time.

3D Models

WL-M06-BLANK-R1 (.zip)

WL-M10-BLANK-R1 (.zip)

Revision History

8 September 2021

  • WL-M06-BLANK-R1-RP – Initial release
  • WL-M10-BLANK-R1-RP – Initial release

Guides

WetLink Penetrator Assembly Guide
The WetLink Penetrator (WLP) is our next-generation solution for low-cost, high pressure, high reliability sealing of electrical cables. This guide will show you how to assemble a WetLink Penetrator using our WLP assembly tools or common hand tools.

Support

Blue Robotics Forums – WetLink Products