This aluminum tube is for use with the Watertight Enclosure for ROV/AUV (4″ Series). It has a significantly increased depth rating compared to the acrylic tube. Note that the inside of the tube is bored out to minimize weight.
Aluminum Tube – 11.75″, 298mm (4″ Series)
retired
$200.00
This aluminum tube for the 4″ Series enclosure has an increased 400m (1,312 ft) depth rating and hard anodized finish. Configure a complete enclosure here.
Please note! This product will be upgraded to a locking version (similar to the 2″ Locking Series) in early 2022.
Out of stock
Product Description
Product Description
This aluminum tube is for use with the Watertight Enclosure for ROV/AUV (4″ Series). It has a significantly increased depth rating compared to the acrylic tube. Note that the inside of the tube is bored out to minimize weight.
Contents
- 1 x 4″ Series Aluminum Tube (11.75″, 298mm)
Specifications
| Parameter | Value | |
|---|---|---|
| Material | Aluminum 6061-T6 | |
| Surface Finish | Hard Anodized Black | |
| Weight in Air | 1006 g | 2.21 lb |
| Depth Rating | 400 m | 1312 ft |
2D Drawings
3D Models
WTE4-M-TUBE-12-R3 (.zip)
Revision History
10 December 2019
- R3 – Initial Release
For previous revision history, please see the R2 page.
Guides
Watertight Enclosure (WTE) Assembly
Learn the basics of assembling a Watertight Enclosure (WTE)!
Using the Vacuum Plug and Hand Pump
Ensure the O-ring seals are good on our WTE with this quick test!