By default, the BaseStation comes with an omnidirectional antenna that receives and transmits signals equally in all directions, making it great for short-range general use. For long-range missions, a directional antenna can greatly boost communication range by focusing the signal towards the BlueBoat.
BaseStation Directional Antenna Kit
new
new
new
$80.00 – $120.00
These directional antennas replace the standard omnidirectional antenna on the BaseStation to boost its communication range. The Panel Antenna Kit provides a mid-range upgrade with a directional, 40-degree beamwidth and the Yagi Antenna Kit provides a long-range upgrade with a highly directional, 25-degree beamwidth.
Product Description
The BaseStation Directional Antenna Kit comes in two versions. The Panel Antenna Kit provides a mid-range upgrade with a wider 40-degree beamwidth. The Yagi Antenna Kit provides a long-range upgrade with a narrower 25-degree beamwidth.
Both kits come with everything needed to install on the BaseStation. You’ll want to mount these on a tripod at least 1.5 meters off the ground, but an even taller tripod will get better performance. Check out the installation guide for more information about installing these on the BaseStation and configuring settings.
Product Description
By default, the BaseStation comes with an omnidirectional antenna that receives and transmits signals equally in all directions, making it great for short-range general use. For long-range missions, a directional antenna can greatly boost communication range by focusing the signal towards the BlueBoat.
The BaseStation Directional Antenna Kit comes in two versions. The Panel Antenna Kit provides a mid-range upgrade with a wider 40-degree beamwidth. The Yagi Antenna Kit provides a long-range upgrade with a narrower 25-degree beamwidth.
Both kits come with everything needed to install on the BaseStation. You’ll want to mount these on a tripod at least 1.5 meters off the ground, but an even taller tripod will get better performance. Check out the installation guide for more information about installing these on the BaseStation and configuring settings.
Panel Antenna
- 1 x Panel antenna
- 1 x N-Type male to male adapter (BR-103221)
Yagi Antenna
- 1 x Yagi antenna
- 1 x N-Type male to male adapter (BR-103221)
- 1 x Yagi antenna mount (BR-103081)
- 1 x Thumbscrew (BR-103157)
- 2 x M6x10 button head screw (BR-103158)
Specifications
| Antenna | Panel Antenna | Yagi Antenna |
|---|---|---|
| Performance | ||
| Practical Communication Range at Sea Level 1 | 500 m | 800 m |
| Gain | 13 dBi | 17 dBi |
| Frequency | 2.4–2.5 GHz 5.15–5.85 GHz | 2.4–2.483 GHz |
| Voltage Standing Wave Ratio | < 2.0 : 1 | < 1.5 : 1 |
| Horizontal Beamwidth | 40°, 41° | 25° |
| Vertical Beamwidth | 35°, 33° | 24° |
| Nominal Impedance | 50 Ohm | 50 Ohm |
| Physical | ||
| Dimensions (Length x Width x Height) | 140 x 120 x 39 mm | 896 x 83 mm |
| Weight | 454 g | 458 g |
| Cable Length | NA | 240 mm |
| Connector Type | N-Type female (male adapter included) | N-Type female (male adapter included) |
| 1 See Tested Range table for more information. | ||
Tested Range
| Tested Range - United States Settings | Tested Range - ETSI Settings | |||||||||
| Stock Antenna | Panel Antenna | Yagi Antenna | Stock Antenna | Panel Antenna | Yagi Antenna | |||||
| Range (m) | Range (m) | % Increase | Range (m) | % Increase | Range (m) | Range (m) | % Increase | Range (m) | % Increase | |
| Average | 498 | 905 | 80% | 1117 | 123% | 332 | 490 | 46% | 623 | 90% |
| * Data was collected under the following conditions: - Calm sea state - Low to medium signal interference - 3 to 10 meters of BaseStation elevation |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
2D Drawings
Panel Antenna
Yagi Antenna
3D Models
PANEL_ANTENNA_BR-103224 (.zip)
YAGI_ANTENNA_BR-103223 (.zip)
Revision History
22 October 2024
- Panel Antenna, BR-103224 - Initial release
- Yagi Antenna, BR-103223 - Initial release
BaseStation Directional Antenna Kit Guide
Learn how to install and use the BaseStation Directional Antenna Upgrade Kits!
