This is a spare Vent Plug for the Enclosure Vent and Plug. It tightens into the vent penetrator and has dual O-rings for a reliable seal.
Have you misplaced your Vent Plug for your Enclosure Vent and Plug? No problem!
Please note! The new revision will have an updated internal geometry.
- 1 x Vent Plug
- 2 x Vent Plug O-Rings
This is the specifications for the complete Vent product.
|Recommended Through-Hole Diameter||10 mm|
|Bolt Threading||M10 x 1.5|
|Bolt Length||25 mm||0.98 in|
|Bolt Head / Nut Diameter||18 mm||0.71 in|
|Wrench Flats||16 mm||5/8 in|
|Bolt O-ring||AS568-013 Buna-N 70A|
|Plug O-rings||2mm Wide, 6mm ID, Buna-N|
|Maximum Tested Depth||1000 m||3280 ft|
31 March 2015
- R1 – Initial release
Watertight Enclosure (WTE) Assembly
Learn the basics of assembling a Watertight Enclosure (WTE)!
WTE Vent Assembly Guide
Quickly assemble a vent for your WTE project!
Using the Vacuum Test Plug
Ensure the o-ring seals are good on our WTE with this quick test!