End caps for the Watertight Enclosure for ROV/AUV (6″ Series).
If you’re looking for a complete set of parts for an enclosure, we highly recommend using the enclosure configurator here.
Watertight Enclosure End Caps (6″ Series)
Product Description
Product Description
End caps for the Watertight Enclosure for ROV/AUV (6″ Series).
If you’re looking for a complete set of parts for an enclosure, we highly recommend using the enclosure configurator here.
- 1 x End Cap (based on selection)
- 10 x M3x12 socket head cap screws for aluminum end caps or M3x16 socket head cap screws for acrylic end caps
Specifications
| End Cap | Acrylic Blank | Aluminum Blank | Aluminum 5 x M10 Hole | Aluminum 15 x M10 Hole | 12 x M14, 12 x M10 Hole |
|---|---|---|---|---|---|
| Material | Cast Acrylic | Aluminum 6061-T6 | |||
| Surface Finish | Optically Clear | Hard Anodized Black | |||
| Weight in Air | 331 g | 359 g | 353 g | 339 g | 306 g |
| Depth Rating | 65 m | 65 m | |||
2D Drawings
Acrylic Blank
Aluminum Blank
Aluminum 5 Holes
Aluminum 15 Holes
Aluminum 15 Holes
3D Models
WTE6-P-END-CAP-R1 (.zip)
WTE6-M-END-CAP-R1 (.zip)
WTE6-M-END-CAP-5-HOLE-R1 (.zip)
WTE6-M-END-CAP-15-HOLE-R1 (.zip)
WTE6-M-END-CAP-12XM14-12XM10-R1 (.zip)
Revision History
20 December 2022
- WTE6-M-END-CAP-12XM14-12XM10-R1 – Initial release
27 April 2017
- WTE6-P-END-CAP-R1 – Initial release
- WTE6-M-END-CAP-R1 – Initial release
- WTE6-M-END-CAP-5-HOLE-R1 – Initial release
- WTE6-M-END-CAP-15-HOLE-R1 – Initial release
Guides
Watertight Enclosure (WTE) Assembly
Learn the basics of assembling a Watertight Enclosure (WTE)!
Using the Vacuum Plug and Hand Pump
Ensure the O-ring seals are good on our WTE with this quick test!
