This is a spare Vent Plug for the Enclosure Vent and Plug. It tightens into the vent penetrator and has dual O-rings for a reliable seal.
Vent Plug
Product Description
Product Description
This is a spare Vent Plug for the Enclosure Vent and Plug. It tightens into the vent penetrator and has dual O-rings for a reliable seal.
Contents
- 1 x Vent Plug
- 2 x Vent Plug O-Rings
Specifications
This is the specifications for the complete Vent product.
| Parameter | Value | |
|---|---|---|
| Recommended Through-Hole Diameter | 10 mm | |
| Bolt Threading | M10 x 1.5 | |
| Bolt Length | 25 mm | 0.98 in |
| Bolt Head / Nut Diameter | 18 mm | 0.71 in |
| Wrench Flats | 16 mm | 5/8 in |
| Bolt O-ring | NBR70 AS568-013 | |
| Plug O-rings | 2mm Wide, 6mm ID, Buna-N | |
| Maximum Tested Depth | 1000 m | 3280 ft |
3D Models
VENT-M-PLUG-10-A-R3 (.zip)
Revision History
31 March 2015
- R1 – Initial release
Guides
Watertight Enclosure (WTE) Assembly
Learn the basics of assembling a Watertight Enclosure (WTE)!
WTE Vent Assembly Guide
Quickly assemble a vent for your WTE project!
Using the Vacuum Test Plug
Ensure the o-ring seals are good on our WTE with this quick test!
