Aluminum End Cap with 2 Holes (2″ Series)
retired
$10.00
This aluminum end cap with 2 holes is for use on the 2″ Series Watertight Enclosure.
Out of stock
Product Description
This aluminum end cap with 2 x 10mm holes for use with Watertight Enclosure for ROV/AUV (2″ Series). If you’re looking for a complete set of parts for an enclosure, we highly recommend using the enclosure configurator here.Product Description
This aluminum end cap with 2 x 10mm holes for use with Watertight Enclosure for ROV/AUV (2″ Series). If you’re looking for a complete set of parts for an enclosure, we highly recommend using the enclosure configurator here.Contents
- 1 x Aluminum End Cap with 2 x 10mm holes
- 6 x M2x10 screws
Specifications
| Parameter | Value | |
|---|---|---|
| Material | 6061 or 6063 Aluminum | |
| Surface Finish | Type 2 Hard Anodizing | |
| Weight in Air | 41 g | 0.09 lb |
| Depth Rating | 1000 m | 3280 ft |
2D Drawings
3D Models
WTE2-M-END-CAP-2-HOLE-R1 (.zip)
Revision History
28 December 2016
- R1 – Initial release
Guides
Watertight Enclosure (WTE) Assembly
Learn the basics of assembling a Watertight Enclosure (WTE)!
Using the Vacuum Plug and Hand Pump
Ensure the O-ring seals are good on our WTE with this quick test!