This is a spare Vent Plug for the Enclosure Vent and Plug. It tightens into the vent penetrator and has dual O-rings for a reliable seal.
Vent Plug
end of life
$4.00
Have you misplaced your Vent Plug for your Enclosure Vent and Plug? No problem!
This is the old version of Vent Plug and is only compatible with the previous version of the Enclosure Vent and Plug (red bulkhead). It is not compatible with the current version of the M10 Enclosure Vent and Plug (black bulkhead).
In stock
Product Description
Product Description
This is a spare Vent Plug for the Enclosure Vent and Plug. It tightens into the vent penetrator and has dual O-rings for a reliable seal.
Contents
- 1 x Vent Plug
- 2 x Vent Plug O-Rings
Specifications
This is the specifications for the complete Vent product.
| Parameter | Value | |
|---|---|---|
| Recommended Through-Hole Diameter | 10 mm | |
| Bolt Threading | M10 x 1.5 | |
| Bolt Length | 25 mm | 0.98 in |
| Bolt Head / Nut Diameter | 18 mm | 0.71 in |
| Wrench Flats | 16 mm | 5/8 in |
| Bolt O-ring | AS568-013 Buna-N 70A | |
| Plug O-rings | 2mm Wide, 6mm ID, Buna-N | |
| Maximum Tested Depth | 1000 m | 3280 ft |
3D Models
VENT-M-PLUG-10-A-R3 (.zip)
Revision History
31 March 2015
- R1 – Initial release
Guides
Watertight Enclosure (WTE) Assembly
Learn the basics of assembling a Watertight Enclosure (WTE)!
WTE Vent Assembly Guide
Quickly assemble a vent for your WTE project!
Using the Vacuum Plug and Hand Pump
Ensure the O-ring seals are good on our WTE with this quick test!
