Lithium Battery Charger


The Lithium Battery Charger is a high power 300W AC/DC balance charger for most battery chemistries, and is perfect for our high capacity lithium-ion battery!

HS Code: 8536.90.85

Product Description

The Lithium Battery Charger is a high power 300W AC/DC balance charger, that will work with most lithium chemistries (Li-Po/Li-Ion/Li-Fe), as well as NiCd/NiMH and lead batteries. With built in balancing and discharge capability, your batteries can safely be kept in top condition for maximum performance and lifespan! A maximum 20A charge current means you can fully charge our Lithium-ion Battery (14.8V, 18Ah) in 1-2 hours at the recommended 10A charge rate.


  • 1 x Lithium Battery Charger
  • 1 x Power lead with North American grounded plug type B
  • OR European CEE 7/7 grounded plug type E/F ‚ÄúSchuko” OR Australian grounded plug type I
  • 2 x XT90 charge lead
  • 1 x Alligator clip charge lead


Input Voltage10-28V DC, 100-240V AC
Max Charge Power300W
Charge Current0.05-20A
Discharge Current0.05-20A
Maximum Discharge Power20W Internal, 300W External
Lithium Cell Count1-6S
NiCd/NiMH Cell Count1-17S
Lead Acid Battery Voltage2-24V
Balance Port3-7 Pin JST-XH
Current Drain for Balancing350mA/cell
Length168 mm6.6 in
Width170 mm6.7 in
Height56 mm2.2 in
Weight1075 g2.37 lb


300W 20A Balance Charger Manual from Turnigy

Revision History

19 June 2018

  • Added Australian plug option.

27 May 2017

  • Initial Release – R1


Although they are safe enough to be used in everyday devices (phones, laptops. etc.) batteries have a high energy density and must be treated with care to ensure proper safe operation and a long lifecycle. When using the charger, be sure to follow proper procedures, and always read the battery manual before charging a new battery.

  • Do not leave unattended while charging
  • Do not exceed the battery maximum charge or discharge rate
  • Do not cover cooling fans or use on a soft surface
  • Charging

    To charge any supported battery, the proper settings must first be selected. The recommended settings specific to our Lithium-ion Battery (14.8V, 18Ah) are listed as an example.

    • Plug battery into charger, as well as balance plug if applicable
    • Select battery type/chemistry (Lithium Battery)
    • Select charge cycle type (Lipo Balance Charge)
    • Select charge current (10A recommended)
    • Press and hold “Start” to begin charge cycle

    Make sure to keep battery and charger away from flammable materials and monitor the battery as it charges, discontinue charging if it becomes hot or changes in appearance.

    Refer to the included manual for more details about charging cycles and other charger functions.


    Blue Robotics Forums – Batteries and Chargers