Our Ethernet Switch product follows the Blue Robotics Connector Standard, using JST GH connectors for Ethernet connectivity. This board and cable allows those connections to be extended to standard RJ45 connections, which come standard on many Ethernet devices. The Ethernet Switch comes with one of these adapters, but more may be required for your application.
RJ45 to JST GH Adapter
$6.00
This RJ45 to JST GH adapter provides an additional RJ45 Ethernet port on the Ethernet Switch. It comes with a 150 mm twisted pair cable and is compatible with the Blue Robotics Connector Standard.
In stock
Product Description
Product Description
Our Ethernet Switch product follows the Blue Robotics Connector Standard, using JST GH connectors for Ethernet connectivity. This board and cable allows those connections to be extended to standard RJ45 connections, which come standard on many Ethernet devices. The Ethernet Switch comes with one of these adapters, but more may be required for your application.
- 1 x RJ45 to JST GH Adapter Board
- 1 x 150 mm JST GH to JST GH twisted pair cable
Specifications
| Parameter | Value |
|---|---|
| Dimensions | 31 x 17 mm |
| Cable Length (included accessory cable) | 150 mm |
Revision History
14 July 2023
- MISC-PCB-RJ45-JSTGH-R1-RP SKU changed to BR-100851
7 September 2021
- MISC-PCB-RJ45-JSTGH-R1-RP – Initial release
Guides
Ethernet Switch Installation Guide for the BlueROV2
Learn how to install the Ethernet Switch in your BlueROV2.
