$28.00
This 128 GB micro SD card is preloaded with BlueOS for the Raspberry Pi computer. It can be configured for the BlueROV2 or BlueBoat and can be used with the Navigator Flight Controller or any ArduPilot compatible controller!
In stock
This 128 GB micro SD card is loaded with BlueOS for the Raspberry Pi computer to help you get started quickly and easily. It can be configured with ArduSub for ROVs, ArduRover for USVs, or any other ArduPilot control software.
This product is provided for convenience, but you can also flash your own SD card with BlueOS using the instructions here.
This 128 GB micro SD card is loaded with BlueOS for the Raspberry Pi computer to help you get started quickly and easily. It can be configured with ArduSub for ROVs, ArduRover for USVs, or any other ArduPilot control software.
This product is provided for convenience, but you can also flash your own SD card with BlueOS using the instructions here.
| Parameter | Value | |
|---|---|---|
| Physical | ||
| Dimensions | 0.59in x 0.43in x 0.04in | 14.99mm x 10.92mm x 1.02mm |
| Storage Temperature | -40ºF to 185ºF | -40ºC to 85ºC |
| Operating Temperature | -13ºF to 185ºF | -25ºC to 85ºC |
| Performance | ||
| Capacity | 128 GB | |
| Class | SanDisk Ultra Class 10 | |
| Read Rate | Minimum 10MB/s Maximum 140MB/s |
|
On the first boot, BlueOS will guide you through a vehicle configuration wizard to set up the configuration for your vehicle. Choose the BlueROV2 option to configure BlueOS for a BlueROV2 or BlueROV2 Heavy. Choose the BlueBoat option to configure BlueOS for BlueBoat.
