This power supply provides 5v power at up to 6A. It accepts input voltages from 7v to 26v and uses a switching converter with minimal heat loss. It comes with two standard servo-style connectors, making it easy to use to power the Navigator or Pixhawk 5v rail for servos, the Raspberry Pi, or other 5v devices.
5V 6A Power Supply
$30.00
This simple power supply converts 7-26V to a steady 5V at up to 6A!
In stock
Product Description
Product Description
This power supply provides 5v power at up to 6A. It accepts input voltages from 7v to 26v and uses a switching converter with minimal heat loss. It comes with two standard servo-style connectors, making it easy to use to power the Navigator or Pixhawk 5v rail for servos, the Raspberry Pi, or other 5v devices.
Contents
- 1 x 5V 6A Power Supply
Specifications
| Parameter | Value | |
|---|---|---|
| Electrical | ||
| Supply Voltage | 7-26V | 2S-6S Li-po/Li-ion Battery |
| Output Voltage | 5 Volts DC | |
| Output Current (Max) | 6 Amps (combined output) | |
| Input Connector | Non-Insulated Spades | |
| Output Connectors | 3 position 0.1” (2.54mm) Crimp Connector Housing | |
| Physical | ||
| Length | 37 mm | 1.45 in |
| Width | 18 mm | 0.71 in |
| Height | 6 mm | 0.24 in |
| Input Wire Length | 140 mm | 5.5 in |
| Output Wire Length | 115 mm | 4.5 in |
Revision History
18 July 2023
- BEC-5V6A-R1 SKU changed to BR-100869
10 October 2018
- R1 - Initial release
Quick Start
1. Connect the wires with the power spades to a positive and negative power source.
2. Connect the wires with the black Crimp Housing to your device. Make sure the polarity is correct.
3. Turn your power source on.
