$60.00
This bracket attaches to the mounting holes on the BlueBoat hull to carry payloads below the waterline. A variety of mounting holes give you options to attach sensors or enclosures. Includes mounting hardware to attach to the BlueBoat.
Available on backorder
The BlueBoat Payload Bracket attaches to the hull below the waterline to carry sensors, enclosures, or other payloads.
The anodized aluminum bracket attaches to the hull mounting holes at the bottom of the hull. It has a variety of mounting holes to attach payloads such as sonars, water quality sensors, or even a camera enclosure.
It includes the hardware needed to attach to the boat, but you’ll have to provide your own hardware to attach your payload.
The BlueBoat Payload Bracket attaches to the hull below the waterline to carry sensors, enclosures, or other payloads.
The anodized aluminum bracket attaches to the hull mounting holes at the bottom of the hull. It has a variety of mounting holes to attach payloads such as sonars, water quality sensors, or even a camera enclosure.
It includes the hardware needed to attach to the boat, but you’ll have to provide your own hardware to attach your payload.
| Parameter | Value |
|---|---|
| Material | Aluminum 6061-T6, type II anodized |
| Weight | 280 g |
| *See 2D drawing for all relevant dimensions. | |
PAYLOAD_BRACKET_BR-101337_RevA_PUBLIC (.zip)
1. Use a 10 mm wrench and 5 mm hex key with the included hardware to mount the Payload Bracket to the hull mounting holes. The Payload Bracket can be mounted to either hull, on either side of the hulls, upside down or right side up, whatever works best for your application.
2. Attach your payload to the Payload Bracket. Check the technical details section for mounting hole pattern.
