Aluminum End Cap with 2 Holes (2″ Series)
This aluminum end cap with 2 holes is for use on the 2″ Series Watertight Enclosure.
This aluminum end cap with 2 x 10mm holes for use with Watertight Enclosure for ROV/AUV (2″ Series).
If you’re looking for a complete set of parts for an enclosure, we highly recommend using the enclosure configurator here.
- 1 x Aluminum End Cap with 2 x 10mm holes
- 6 x M2x10 screws
|Material||6061 or 6063 Aluminum|
|Surface Finish||Type 2 Hard Anodizing|
|Weight in Air||41 g||0.09 lb|
|Depth Rating||1000 m||3280 ft|
28 December 2016
- R1 – Initial release