- 1 x T200/M200 Rotor
- 1 x Shaft Collar
- 1 x Set Screw
See respective T200/M200 product pages for specifications:
19 September 2014
- R1 – Initial Release
1. Connect motor wires to ESC and connect the ESC to power and a signal.
2. Send a signal and the thruster will start spinning. That’s it.
Always practice caution when you’re working with electricity in water and with the spinning blades of the propeller. Keep body parts away from the thruster inlet and outlet to avoid injury.
Do not operate the thruster for extended periods out of water. The bearings are lubricated by the water and vibration and noise will be greater when dry.
Do not use threadlocking compounds like Loctite on any part of the thruster. It will damage the plastic and cause it to become brittle.
The thruster can handle saltwater environments pretty well, but it does not get along with seaweed. Avoid sucking seaweed into the thruster to avoid damage.
Learn how to take apart your thruster for cleaning, inspection or just to see how it works!
Quickly disassemble an M100 or M200!