Low-Light Analog Camera (Retired)
$32.00
This analog camera has incredible low-light sensitivity, 700TVL resolution, wide-angle field-of-view, and a standard NTSC or PAL video output.
Product Description
This low-light analog camera is very well suited for use in subsea applications. With a light sensitivity of just 0.0003 lux, it can pick up colors and maintain good quality even in very low-light situations. In our own testing, we found that this camera is sensitive enough to show colors in a dark room where most cameras will show nothing but black! With a 2.1mm lens, it has a wide-angle field of view of 128 degrees horizontally and 96 degrees vertically. The camera consists of the 1/3″ Sony Super HAD 810 CCD sensor and the Sony Effio-A 4151 System IC, with 700TVL resolution and digital noise reduction. The camera outputs a standard NTSC or PAL signal compatible with many displays and capture cards. This camera works great with the Fathom-S Tether Interface Boards for clear video over tethers of 300m or more! The included cable plugs directly into the Fathom-S board for easy setup. Besides subsea applications, this camera is fantastic for FPV flying of drones and other vehicles as well!Product Description
This low-light analog camera is very well suited for use in subsea applications. With a light sensitivity of just 0.0003 lux, it can pick up colors and maintain good quality even in very low-light situations. In our own testing, we found that this camera is sensitive enough to show colors in a dark room where most cameras will show nothing but black! With a 2.1mm lens, it has a wide-angle field of view of 128 degrees horizontally and 96 degrees vertically. The camera consists of the 1/3″ Sony Super HAD 810 CCD sensor and the Sony Effio-A 4151 System IC, with 700TVL resolution and digital noise reduction. The camera outputs a standard NTSC or PAL signal compatible with many displays and capture cards. This camera works great with the Fathom-S Tether Interface Boards for clear video over tethers of 300m or more! The included cable plugs directly into the Fathom-S board for easy setup. Besides subsea applications, this camera is fantastic for FPV flying of drones and other vehicles as well!Contents
- 1 x Low-Light Analog Camera
- 1 x 3-pin video cable
Specifications
Parameter | Value |
---|---|
Physical | |
Camera PCB Dimensions | 38mm x 38mm |
Mounting Hole Spacing | 33mm x 33mm |
Electrical | |
Voltage | 12V DC |
Max Current | 120 mA |
Performance | |
Field Of View (Horizontal) | 128° |
Field Of View (Vertical) | 96° |
Resolution | 700 TVL |
Output | NTSC or PAL |
2D Drawings

3D Models
CAM-ANALOG-R1 (.zip)Revision History
18 May 2016
- Initial Release – R1
Quick Start
Analog Camera Installation
To Fathom-S
Plug in the camera connector to the Fathom-S making sure that that the yellow wire connects with VID, red with 12V, and black with GND.