Cable Penetrator for 6mm Cable (Retired)
$0.00
This is the old version of this product. You can check out the updated version here.
This cable penetrator makes a waterproof, high-pressure seal to pass the thruster cable into a water-tight enclosure. Each set includes a bolt, nut, and o-ring. Some assembly required.
Out of stock
Product Description
This is the old version of this product. You can check out the updated version here.
This cable penetrator is a simple solution to waterproofing your robot. It’s basically a bolt with a hole that the thruster cable can be glued into to provide a waterproof connection through water-tight enclosures, boxes, panels, etc.
Features
- Anodized aluminum construction for corrosion resistance and high strength
- O-ring seal that works on any smooth surface
- Multiple inner diameters to secure the cable jacket but leave room for potting compound
- Works for cables smaller than 6mm as well
Contents
- 1 x Cable Penetrator Bolt
- 1 x Cable Penetrator Nut
- 1 x O-Ring
Specifications
| Parameter | ||
|---|---|---|
| Recommended through-hole diameter | 10 mm | |
| Bolt Threading | M10 x 1.5 | |
| Bolt Length | 0.98 in | 25 mm |
| Bolt Head / Nut Diameter | 0.71 in | 18 mm |
Product Description
This is the old version of this product. You can check out the updated version here.
This cable penetrator is a simple solution to waterproofing your robot. It’s basically a bolt with a hole that the thruster cable can be glued into to provide a waterproof connection through water-tight enclosures, boxes, panels, etc.
Features
- Anodized aluminum construction for corrosion resistance and high strength
- O-ring seal that works on any smooth surface
- Multiple inner diameters to secure the cable jacket but leave room for potting compound
- Works for cables smaller than 6mm as well
Contents
- 1 x Cable Penetrator Bolt
- 1 x Cable Penetrator Nut
- 1 x O-Ring
Specifications
| Parameter | ||
|---|---|---|
| Recommended through-hole diameter | 10 mm | |
| Bolt Threading | M10 x 1.5 | |
| Bolt Length | 0.98 in | 25 mm |
| Bolt Head / Nut Diameter | 0.71 in | 18 mm |