Low-Light Analog Camera


This analog camera has incredible low-light sensitivity, 700TVL resolution, wide-angle field-of-view, and a standard NTSC or PAL video output.

HS Code: 9007.10.00

Product Description

This low-light analog camera is very well suited for use in subsea applications. With a light sensitivity of just 0.0003 lux, it can pick up colors and maintain good quality even in very low-light situations. In our own testing, we found that this camera is sensitive enough to show colors in a dark room where most cameras will show nothing but black! With a 2.1mm lens, it has a wide-angle field of view of 128 degrees horizontally and 96 degrees vertically. The camera consists of the 1/3″ Sony Super HAD 810 CCD sensor and the Sony Effio-A 4151 System IC, with 700TVL resolution and digital noise reduction. The camera outputs a standard NTSC or PAL signal compatible with many displays and capture cards. This camera works great with the Fathom-S Tether Interface Boards for clear video over tethers of 300m or more! The included cable plugs directly into the Fathom-S board for easy setup. Besides subsea applications, this camera is fantastic for FPV flying of drones and other vehicles as well!


  • 1 x Low-Light Analog Camera
  • 1 x 3-pin video cable


Camera PCB Dimensions38mm x 38mm
Mounting Hole Spacing33mm x 33mm
Voltage12V DC
Max Current120 mA
Field Of View (Horizontal)128°
Field Of View (Vertical)96°
Resolution700 TVL
OutputNTSC or PAL

2D Drawings

3D Models

CAM-ANALOG-R1 (.zip)

Revision History

18 May 2016

  • Initial Release – R1

Quick Start

Analog Camera Installation

To Fathom-S

Plug in the camera connector to the Fathom-S making sure that that the yellow wire connects with VID, red with 12V, and black with GND.


Blue Robotics Forums – Sensors