$150.00

The Pixhawk Autopilot is an advanced autopilot system that runs the ArduSub control software for the BlueROV2. It can be used on other subsea vehicles and also supports the ArduPilot, ArduCopter, ArduRover software. This Pixhawk is the original 2.4.7 version with DF13 connectors.

SKU: PIXHAWK-R1-RP
HS Code: 9014.80.4000

Product Description

Pixhawk is an advanced autopilot system designed by the PX4 open-hardware project. It features advanced processor and sensor technology from ST Microelectronics and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

The benefits of the Pixhawk system include integrated multithreading, a Unix/Linux-like programming environment, completely new autopilot functions such as Lua scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes. These advanced capabilities ensure that there are no limitations to your autonomous vehicle. Pixhawk allows existing ArduPilot and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users to participate in the exciting world of autonomous vehicles.

Note, this version of the Pixhawk is the original 2.4.7 version with DF13 connectors.

Product Description

Pixhawk is an advanced autopilot system designed by the PX4 open-hardware project. It features advanced processor and sensor technology from ST Microelectronics and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

The benefits of the Pixhawk system include integrated multithreading, a Unix/Linux-like programming environment, completely new autopilot functions such as Lua scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes. These advanced capabilities ensure that there are no limitations to your autonomous vehicle. Pixhawk allows existing ArduPilot and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users to participate in the exciting world of autonomous vehicles.

Note, this version of the Pixhawk is the original 2.4.7 version with DF13 connectors.

Contents

  • 1 x Pixhawk Autopilot

Quick Start

1. Install Blue Robotics supported version of QGroundControl.
2. Install most recent stable version of ArduSub.
3. Follow the ArduSub Initial Setup guide.

Connector Port Locations

Pixhawk Connector Locations

Guides

ArduSub Documentation (GitBook)

Support

Blue Robotics Forum – ArduSub