$4,400.00

This is a component of the Outland Technology Power Supply. The ROV enclosure replaces the ROV’s battery enclosure and converts 400 VDC power from the tether to 15 VDC power for the ROV.

For a complete system, see the Outland Technology Power Supply for the BlueROV2.

In stock

SKU: BR-100667
HS Code: 9014.80.4000

Product Description

The ROV Power Supply Enclosure is a component of the Outland Technology Power Supply (OTPS). This component of the system is a drop-in replacement for the battery enclosure on the BlueROV2 and converts high-voltage power from the Topside Power Supply Unit to the low-voltage power needed by the ROV. It’s built into an aluminum 3″ enclosure and is ready to connect to the BlueROV2 electronics enclosure and the OTPS high-power tether cable.

The ROV Power Supply Enclosure has pre-installed power and tether signal cables with penetrators that make it a drop-in replacement for the original BlueROV2 battery tube. The wires in the tether signal cable are connected to the 8 pins on the tether signal connector, allowing pass-through connections for the Fathom-X signal and an auxiliary twisted pair. We have clear instructions on how to install the enclosure on your BlueROV2.

The enclosure is equipped with two wet-mateable electrical connectors that allow the ROV to be connected and disconnected from the tether cable. One 3-pin connector handles the high-voltage power and ground connection while an 8-pin connector handles the signal connections.

Added internal features lock the enclosure shut and tamper resistant screws prevent users from accidentally accessing high-voltage electronics.

This product is available separately, but if you want a complete power system for the BlueROV2 we recommend configuring the complete system from the Outland Technology Power Supply product page.

Product Description

The ROV Power Supply Enclosure is a component of the Outland Technology Power Supply (OTPS). This component of the system is a drop-in replacement for the battery enclosure on the BlueROV2 and converts high-voltage power from the Topside Power Supply Unit to the low-voltage power needed by the ROV. It’s built into an aluminum 3″ enclosure and is ready to connect to the BlueROV2 electronics enclosure and the OTPS high-power tether cable.

The ROV Power Supply Enclosure has pre-installed power and tether signal cables with penetrators that make it a drop-in replacement for the original BlueROV2 battery tube. The wires in the tether signal cable are connected to the 8 pins on the tether signal connector, allowing pass-through connections for the Fathom-X signal and an auxiliary twisted pair. We have clear instructions on how to install the enclosure on your BlueROV2.

The enclosure is equipped with two wet-mateable electrical connectors that allow the ROV to be connected and disconnected from the tether cable. One 3-pin connector handles the high-voltage power and ground connection while an 8-pin connector handles the signal connections.

Added internal features lock the enclosure shut and tamper resistant screws prevent users from accidentally accessing high-voltage electronics.

This product is available separately, but if you want a complete power system for the BlueROV2 we recommend configuring the complete system from the Outland Technology Power Supply product page.

  • 1 x Outland Technology Power Supply ROV Enclosure

Specifications

ParameterValue
Electrical
Output Voltage (Nominal)15VDC
Output Current (Max)66.8A
Output Power (Max)1000W
Efficiency (Nominal)92%
Physical
Mass1.81 kg4 lbs
Length285 mm11.2 in
Outer Diameter89 mm3.5 in
Depth Rating300 m984 ft

Documents

Limited Warranty (.pdf)

OTPS User Manual 46-0013 Rev B3 (.pdf) (current)

OTPS User Manual 46-0013 Rev A5 (.pdf) (retired)

Revision History

18 July 2023

  • OTPS1KW-ASM-ROV-R2 SKU changed to BR-100667

3 January 2022

  • R2 – Initial release
  • Single power cable changed to dual power cables
  • Changed from 3.5 mm to 5.5 mm bullet connectors on power cables
  • Potted penetrators changed to WetLink Penetrators

10 December 2019

  • R1 – Initial release

Guides

Outland Technology Power Supply BlueROV2 Integration
Convert your BlueROV2 to use a topside power supply instead of batteries.

User Manual

OTPS User Manual 46-0013 Rev B3 (PDF) (current)

OTPS User Manual 46-0013 Rev A5 (PDF)

Support

Blue Robotics Forum – BlueROV2